How has this worked out for you I’m having the same problem. I replaced the air bags but they still do not inflate. Sometimes the compressor runs and other times it does not. Any help would be appreciated.Update on my situation. I found the online service manual, and ran a straight 12V right to the compressor. It kicked on, so I know my compressor is not fried. But the springs were not inflating at all, and I could hear air flowing. I pulled the springs back out and tested them individually on the bench with compressed air. First one worked fine, second one - nothing. On further inspection, I found that the locating pin on the bottom had busted off. Not sure if it was a defect or if it got cocked out of position somehow. Hopefully I can get something done under warranty with Unity. In the meantime, I tested both of my original springs with air and soapy water, and found that only one of them appeared to be leaking. Just for added measure, I coated the dry rotted area of the good one with black silicone - I figured it couldn't hurt. Reinstalled both springs, and again - nothing from the compressor. So I gave up for the night. I was planning to straight wire the compressor again to test it, and almost on a whim last night I hit the key, and the compressor fired right up and inflated the springs. I am wondering if the ECU tripped a code to prevent the compressor from firing up, and reset itself after enough time had passed.
I'm going to see if it holds for a few days before driving it. Fingers crossed! Thanks for all the help!
Just adjust the sensor so in normal position its taller. The 5100s won't work they aren't valve for air coils. I'm running rancho rs9000 which are adjustable, on 4 they are great.I have another question altogether and that is, I love the air ride and height control for towing and I was wondering if anyone makes a spacer block say 3 inch puck that could bolt under the bag and lift it 3 inches and re-adjust the position sensor so that I can gain 3 inches of lift, run 5100 series bilstiens and keep the air ride in tact for towing
I think I just read your whole build thread on some other fourm too. great stuff. I hate that you had such a nasty hole from the DVD player.Just adjust the sensor so in normal position its taller. The 5100s won't work they aren't valve for air coils. I'm running rancho rs9000 which are adjustable, on 4 they are great.
I think when I raised the bags to max height with the sensor completely disconnected it was at 6 inches. I've run it at 3" at "normal" for over a year and wheeled it that way without issue. I still can raise it up more with the height control and lower it when I go into parking garages. It has worked out well so farI think I just read your whole build thread on some other fourm too. great stuff. I hate that you had such a nasty hole from the DVD player.
that is all I needed to read man I'm inI think when I raised the bags to max height with the sensor completely disconnected it was at 6 inches. I've run it at 3" at "normal" for over a year and wheeled it that way without issue. I still can raise it up more with the height control and lower it when I go into parking garages. It has worked out well so far
I have the toytec boss up front (check thread) Rancho RS999208 is what I ran.So I ordered new bags cause mine seem to keep pressuring down I’m assuming they are dry rotting I’ll be installing those as soon as they get here, I have a question though on your shocks
What are the model numbers for the rear and such shocks did you go with up front, I jumped the gun and bought a set of wheels and tires before I knew how tall they would be and they are basically 33’s so I wanna make sure I clear them.
Sent from my iPhone using Tapatalk
Sounds like your bracket broke. I have some pictures in my thread of the bracket, you can disco it and zip tie it.Hey All,
I've got an '05 limited sequoia with air height control on the fritz. Both airbags have filled up completely bringing the wheelwell at least 8" above the tire and the manual height controls are not working. Has anyone safely adjusted the ride height sensor or been able to release air from the lines leading to the bags? I'm hoping to just release enough air put of the bags and pull the fuse on the system all together. Thanks for any and all help!
Cheers,
Saltycapstone