I measured the rear end height. 26 inches. Oh, crap 5 inch increase. I put Bilstein shocks in the rear. Done!!! I had to adjust my thinking because of height. I had The Bilstein 6112 for the front and it was on tthe lowest setting. I adjusted the spring clip to the middle setting (3.3 inch increase). The data I was reading, said, the middle setting was the max I could go with a 2wd. I was very concerned about the alignment issues. So, I bought the SPC upper control arms. Well, really I had them already. But now, I really had to install them. So with the new shocks, and upper control arms it turned out to be 24 inches in the front. (Center of wheel to fender). I have a two inch rake. From back to front. The look isn't so bad. And the head lights are perfect. I didn't have to make any adjustments.