CEL with P0418 and P2445 Need help!

[barko4]

Good morning all, I have a 2007 Sequoia SR5 and just 2 days ago I got a CEL, and the two VSC lights with the p0418 and p2445 codes. I checked the fuse, I checked the two solenoids (attached to the bracket on the side of the plenum) and am getting ready to take off the intake. Before I do that, is there a way to check the module driver? TIA

 

[barko4]

Too late. I got the intake off and ran some jumpers wires directly to the secondary air pump. It did nothing. I am going to replace that and also have a severely cracked hose between the bypass valve and the check valves.

 

[barko4]

Ok so it looks like I'll be replacing the long rubber hose, air pump and both check valves.

 

[barko4]

Parts are starting to roll in. Found a great deal on a Toyota OEM secondary air injection pump. Brand new for $300. It should arrive on Wednesday and then I can start putting everything back together.

 

[barko4]

All parts are in and it's running awesome! Thanks for all of the help from everyone!