Not sure where I'm going with this build yet. Came from a built 80 so my knuckles are still bleeding... Just going to link to my Mud thread for now if it will let me. https://forum.ih8mud.com/threads/2005-sequoia-limited-build-thread.1129845/
so what's the procedure to get the height where you want it? Unlink the bracket and then use the screw you mentioned to raise neutral setting then add 2.5" piece?Thanks man, I'll get you a pic of how it's set up today. Just a short 2.5" 2 hole piece of metal, very simple. Getting the ride height where you want it and locking it down.
I installed the bracket, let the bags adjust and then moved the bracket until I got the height I wanted and then tightened the nuts. took about 20 minutesso what's the procedure to get the height where you want it? Unlink the bracket and then use the screw you mentioned to raise neutral setting then add 2.5" piece?
when you say let the bags adjust what makes that happen? Is that by turning the screw on the height adjust under the vehicle to increase the neutral height? Hey also I know initially you removed the running boards and I am too but in some later pics it looks like yours has tubular steel side rails/rock rails? If so, where did you buy? I'm having trouble finding online. Thanks for all your help!!!I installed the bracket, let the bags adjust and then moved the bracket until I got the height I wanted and then tightened the nuts. took about 20 minutes
Check out my thread on mud. Lots of info. The sensor makes the height change. You set the sensorwhen you say let the bags adjust what makes that happen? Is that by turning the screw on the height adjust under the vehicle to increase the neutral height? Hey also I know initially you removed the running boards and I am too but in some later pics it looks like yours has tubular steel side rails/rock rails? If so, where did you buy? I'm having trouble finding online. Thanks for all your help!!!