How to remove the front bumper of a 2004 Toyota Sequoia?

[bear15]

We are getting ready to replace the front bumper cover. Does anyone have step-by-step on how to remove the front bumper of a 2004 Toyota Sequoia?

Thanks for any help. Ed

 

[desertrunner04]

Detach the fog light connectors. Then push in on the retaining tabs and pull the lights out. Remove the 10mm bolt in the lower left and right corners near the fender liners. Then pop the black clips along the lower edge. Remove the black clips along the top edge that are visible with the hood popped. Buy new clips because they will probably break upon removal. Pull straight back on the bumper cover and it will come off.

 

[bear15]

Many thanks!

 

[cambon]

I followed the above steps and it seems like there are still two screws holding it connected to the fender flare. I have a 2002 sequoia.

 

[Boba Fett]

Here is a video that show how to remove it. 1st gen was not putting it back on but this should help you see what clips and bolts to take it off. Around 3:30 is the removal process. Hope this helps.