BigNuge’s 2002 Limited Build

Ghost

Active Member
May 16, 2019
20
6
3
58
BigNuge, what size are the Rhinos ? and the rubber. Looking to do a similar lift and wheels. I am assuming they are -6 off set ? or did you run spacers ?
 

BigNuge

Familiar Member
Jan 3, 2021
55
45
18
47
BigNuge, what size are the Rhinos ? and the rubber. Looking to do a similar lift and wheels. I am assuming they are -6 off set ? or did you run spacers ?

16x9 -10

305/75 (33x12)

No spacers, never spacers.


Sent from my iPhone using Tapatalk
 
Last edited:
  • Like
Reactions: Ghost

BigNuge

Familiar Member
Jan 3, 2021
55
45
18
47
Spare tire carrier/swing all finished up.

Time to wheel it!

f77e97bbe0be4bc6f5c6e53c215c215b.jpg

33c99564af10230d23664d3f4b9c1b4d.jpg

10c7c5904e09f6d4f04eb66682dfd448.jpg

61bc87dcf16750f63de471e2f9395054.jpg

208761c23bfc4bd75d4263482de11e84.jpg

4f8ce21504c6b127c33f4f1ce15154e3.jpg

658752bbd5f04cf6db0785ced9d9f710.jpg

13c8138628de2c22f975f98a87542da7.jpg



Sent from my iPhone using Tapatalk
 
  • Like
Reactions: J4roe and Jgrauman

BigNuge

Familiar Member
Jan 3, 2021
55
45
18
47
Where did you get the molles for the rear windows?? Love them !!

I got them from a guy on the TSOR group on FB, he went by Red Clay Fab. For some reason he folded up quick, only got a handful of orders out before he ghosted a bunch of people. I was one of the lucky ones to get my order!

I think there are a few more fab guys making them through, just don’t have any contacts for them.


Sent from my iPhone using Tapatalk
 

Jim SoG

New Member
Mar 22, 2021
11
0
1
61
Dang you have done a ton of work, excellent job and postings, thank you!



Jim
 
Last edited:

Jgrauman

Well-Known Member
Feb 18, 2019
221
53
28
42
Where did you get the molles for the rear windows?? Love them !!
That shop is just down the road from me, I've wanted to go check it out a few times but never got around to it. Wasn't aware he packed up
 

BigNuge

Familiar Member
Jan 3, 2021
55
45
18
47
Dang you have done a ton of work, excellent job and postings, thank you!



Jim

Thanks! I just replaced the steering rack (developed a leak on my last trip). All fixed up now, back on the road.


Sent from my iPhone using Tapatalk
 

Mtoddsolomon

Active Member
Jun 11, 2019
34
4
8
38
So how bad is a wheel bearing replacement? I’m about to pull everything apart for lift, lower ball joint, upper control arm, and more than likely headers. I have a hummm as I’m driving now so I’m guessing it’s about time for the wheel bearings. I don’t have a press so I’m assuming it’s impossible.
 

Ghost

Active Member
May 16, 2019
20
6
3
58
So how bad is a wheel bearing replacement? I’m about to pull everything apart for lift, lower ball joint, upper control arm, and more than likely headers. I have a hummm as I’m driving now so I’m guessing it’s about time for the wheel bearings. I don’t have a press so I’m assuming it’s impossible.

Hey, I just saw this and wanted to weigh in and say I just did my rear bearings on my 2002. I know this may be a noob move but I went with the Dorman full shaft and assembly all in one. I was a little hesitant at first and was worried about going non-OEM, but I currently do not go off roading or anything rough. I have to say, very pleased with the quality of the parts, the fit was excellent and ease of installation. I am doing the same as you in the spring, lift kit for both front and rear. Hope this was a little help.
 

Mtoddsolomon

Active Member
Jun 11, 2019
34
4
8
38
Hey, I just saw this and wanted to weigh in and say I just did my rear bearings on my 2002. I know this may be a noob move but I went with the Dorman full shaft and assembly all in one. I was a little hesitant at first and was worried about going non-OEM, but I currently do not go off roading or anything rough. I have to say, very pleased with the quality of the parts, the fit was excellent and ease of installation. I am doing the same as you in the spring, lift kit for both front and rear. Hope this was a little help.
I guess what I’m worried about is not having a press. Iv used the wheel bearing nut truck before but I’ve heard that won’t work with the sequoia. Plus the fronts don’t come in a new hub assembly. You just get assembly parts.
 

Ghost

Active Member
May 16, 2019
20
6
3
58
I guess what I’m worried about is not having a press. Iv used the wheel bearing nut truck before but I’ve heard that won’t work with the sequoia. Plus the fronts don’t come in a new hub assembly. You just get assembly parts.

I completely understand. I guess you could split the difference and if you want to do most of the disassembly yourself, purchase the new bearings, and once you get the knuckles off, simply find a local shop that can just do the press and seal for you. I have a press and it is still something I would consider myself.

Here is a good comprehensive video.

 
  • Like
Reactions: Mtoddsolomon