2007 Sequoia - Mini Light Bar - In Grill?
- Thread starter jts14u
- Start date
I’ve not done it yet but have similarly looked into it. On the lower grill, it has a great mounting location on the support bracket. I’ve seen YouTube videos showing a 30” two-row light bar in there. For the upper bumper portion, I’ve seen very slim light bars from a company called OZ-USA (note - never used these bars, know nothing about their quality, but came across them in my searches). The catch is anything over 20” will block the hood release.
If you install anything, please post pics and how you did it.
SoCalMike: Thanks for the feedback. I visited the OZ website, the shortest one they have is 11.12" with the mounting brackets. If I recall my measurements, that about 3" too long. I 'm looking at the Rough Country Slim Line. It's the only one that I've found that might fit the bill.
6 Inch Black Series LED Light Bar - Slim Line.
- Length: 7.82" Depth: 1.78" Height: 0.98"
I'm looking to do something like this also. I went on Amazon and started looking at all the lights. There are some slim designs that should fit in there perfect ! Good luck
Yes, Rough Country makes a 6" Slime Line light bar. I'm also considering their 6" flush mount lights. By putting the lights in the upper grill the challenge I see is rerouting the hood latch.
I found "Colight" last night. The have a 2" X 4" light that might be a good fit in the lower grill.
More to come. This is No. 3 priority stuff right now.
I found "Colight" last night. The have a 2" X 4" light that might be a good fit in the lower grill.
More to come. This is No. 3 priority stuff right now.
Hi guys - how would you wire this light bar? There is a rubber grommet on the driver's side engine firewall next to the brake reservoir and then you can tap into the fuse box on the driver side dashboard. But this is too much of a hassle. Is there a way to tap directly to an ignition wire inside the engine?