2004 Sequoia Baby Panda

toyotech

Active Member
Oct 30, 2018
37
13
8
40
Been meaning to start a build page on here now that I got some work done. If you don’t know me. I been around on the FB TSOR group for a while now. I also help handle many of Brute Force Fab (BFF) orders for 1st gen Tundra/Sequoia. I recently started to bring more aftermarket support for us 1st gen guys under Off-Road Custom Design (OCD).

Anyways I’ll keep this page showing the progressive of my Sequoia build.

Most of the build will copy my currently Tundra Adventure Cab.

7015992e2c72fda25b364fcc5c7b2fb8.jpg

60d6e105b2cfd447c3cce42f75ab8a37.jpg
f17af8d3e0ef34851409e3f1b7aa4f90.jpg
ad2b624e1c0870f8e2d7632167c7d3be.jpg



Sent from my iPhone using Tapatalk
 

toyotech

Active Member
Oct 30, 2018
37
13
8
40
First thing first was a solid wash and paint correction via my detail guy and best friend.

a4331fabef70c5b32fb5038cb424f10a.jpg
4e233c599ff316e70d87ec56daefeb21.jpg
892107f4b5c622ed5168feced5b0673c.jpg
2c512f2e0c227c0053fd4499cd40b08b.jpg
acbc49ef63cd44ed033e4ff84699a1ef.jpg
e299eec211a6ab03e6909c36a3c2d881.jpg
0226add5817b654b6679a879d66e2c35.jpg
e84fec26aa9d2c4e78f165a146797ff1.jpg
bfc0c5524916e11b8f4a9dc10d48c9d4.jpg
9c935817bdd2b4ca91d8f9bef4b5f57b.jpg
5c687ec28b4c728f698b6f1be9fd7889.jpg
5fa74d65a56d93d16d6c5c7081e18a47.jpg



Sent from my iPhone using Tapatalk
 

toyotech

Active Member
Oct 30, 2018
37
13
8
40
Next was addressing the major service so I can properly baseline. Did the timing belt. Water pump. T stat and coolant.
11ba92df2af8349f832f18b13c47ec73.jpg
fbdb857172b6eb195b402f62f176395f.jpg
fdf35bc17b9c3ebf7bd26e0a41744971.jpg


Shortly after I also did the 05+ plastic variable runner plenum. So far I have noticed low to mid range throttle response is better.

Ideally it’s easier to be done on 03-04 because it’s true DBW. You will need to use the 05+ throttle body. I also bypassed the coolant to the throttle body at this time. Doesn’t snow where I live.

2070fd13c8738ecf1508bd5ef6c1920b.jpg

11fd7f888dd41a68673ce50876504423.jpg
4fce1801aafe20f0afe2080bf1a14ab8.jpg
798d79e805d3a6b445089957807fe857.jpg
ad195486d255da0b40e54d64e8722682.jpg
e01eab8692d1f576a2cd3b14283dd953.jpg
82afe2db7f2cb2d54b990958bee2220a.jpg



Sent from my iPhone using Tapatalk
 
Last edited:

toyotech

Active Member
Oct 30, 2018
37
13
8
40
Got a little crazy with the LED. Swapped all the interior lights to LED and color changed the cluster to red. Will need to replace the HU so it matches or go HU less with a Bluetooth amp like in my tundra.

866ffe64e6bc25c37b7901bcc8ad6e35.jpg
9f6987848f3fd3d4fa097866b24674f9.jpg
d6241f50e0596bc23504c84c32dc814f.jpg
9ba307d4211e7bb431ba33232d846a34.jpg
c36c9e896363373f0a3acd6540200115.jpg
b31d8699d1e9d6d252b60cba67b1912b.jpg
d690a6d38e305b6179e27096e1ad94d5.jpg



Sent from my iPhone using Tapatalk
 

toyotech

Active Member
Oct 30, 2018
37
13
8
40
Upgraded all the outlets inside to much more usable plugs.
f75524fe736b49297f69bd321c35cee7.jpg
ddcd2a1a38d3c01ac4793ff695a67822.jpg
845c3bb20f4a3e02bf8a18e988bd8675.jpg
b22c4151a5de5bbde6019b47b628da48.jpg


Will be switching this to red soon.
6dedf403d600cddce10d9e032dc46a78.jpg
5e7d92c02db7117129758792253ee836.jpg



Sent from my iPhone using Tapatalk
 

toyotech

Active Member
Oct 30, 2018
37
13
8
40
4718c3a9af5148d620c71540e10ed8a5.jpg


Built myself a set of much needed headlight retrofits. Can also spot the working prototype of the OCD SEQRRK. Sequoia Roof Rack Kit.

Did finalized the roof rack and threw a little paint on it to see it better. Will be coming off to get powdercoated soon. I’m currently have a few kits available. They are sold without crossbars and the end user will purchase them separately. Link to buy them will be provide with each order.

d59816f8f51acee9184c6e55dc575d35.jpg
e71aa77d4b1c18a853d4f4f6725e0d61.jpg
e9f2c6dccec7455f946a810b2db0954c.jpg
0da5a07133a648a0e2c37f373be987bd.jpg
aac2965bd40f3965bc53f78da24dc1f3.jpg
411888c1034181ae2b460cc33aafe0a4.jpg
5541f4520ad18a9d5b26f1e7fab89301.jpg



Sent from my iPhone using Tapatalk
 

toyotech

Active Member
Oct 30, 2018
37
13
8
40
Always love vent visors. These are double side tape version which I prefer.

8bde4bfacc7a1100b4d5f839822292ae.jpg
923b326bcd8400776fe09b4d3fee9284.jpg
819c36febfb3b0b52678927b565da7a6.jpg
c50aea1f09da05ea7b5dd8fea654cc71.jpg



Sent from my iPhone using Tapatalk
 

toyotech

Active Member
Oct 30, 2018
37
13
8
40
Project Group 31 Battery

-Trim tray so battery sits flat
-Place battery in vehicle with modified tray
-J bolt doesn’t reach so I just hooked it in a different spot. May get longer j bolt later.
-Unclip cable harness to gain more length
-Remove positive cable from terminal to relay box.
-Install positive terminal to battery
-Take cable from relay and use the extra positive stud on battery
- remove negative body ground
- Run negative terminal to negative post
- Drill new body ground hole
- install m6 nutsert
- reinstall body ground

- start vehicle and let it relearn idle

- enjoy the extra reserve capacity

c45a6c018a0dc234b1ce2d760b230cab.jpg
27d08ddbda4c037552e5ed0e45f64ef1.jpg
4c3dac7337b4dc0cbccf08a484cfdbe0.jpg
8b8bdfde41d97242be2f315f08473d2b.jpg
01178dfd20938770fd6d74fed3ed4d8a.jpg
c5687f40485ed8ec3c649b8cc448af4b.jpg
da3cf9a822e558a71b655d43d29fb1a9.jpg
a6df0c7a2da7551da11fc333dbf8d9f3.jpg
ed405f23d17fe7b80a4629bc2ac14d7d.jpg
9f38b7538942fe491deb460dde6f9415.jpg
64439fc30850a48404b807990abeeec8.jpg
45023b9441a57163fd4236296b2042be.jpg
978b19366b22c83e2a29ea30bcb5cf3e.jpg
555b493e31428ffea64e6672a8c13d4b.jpg
bed0b4b860a7775dc1273d19890c2adc.jpg



Sent from my iPhone using Tapatalk
 

toyotech

Active Member
Oct 30, 2018
37
13
8
40
Replaced the ball joints so I know the history of them as it’s common for them to fail

Also installed a set of spidertrax 1.25 wheel spacers for the fj80 wheels I have for it later.

f4b6d5e7173fdcb08e8f62579416a4e3.jpg
ee89a8815c72ccf5c9b8620ae586e952.jpg
5d71a57c136a9d9173d0135edb9cb64a.jpg
42881aa81b083dea48818ea10dc27104.jpg
5b6dadcc950e4a9319eecd9c39994a46.jpg
7b8f6e1fa2a4ed14674eca9c56976158.jpg



Sent from my iPhone using Tapatalk
 

toyotech

Active Member
Oct 30, 2018
37
13
8
40
Installed a set of husky liners for them dirty trails

0601807979c9ef6f29199559d619883e.jpg
237ce29de872a99d614c09726f18ef58.jpg
50e5ec54e14581391f206d8c4387566e.jpg
ecad904ca673bac695232e338d7acbf1.jpg



Recently got a new windshield as there was a crack that was getting bigger

21bb41b1475ae3c7c2d5b990cbfcec56.jpg
b643081d3b768e11d14eead1be87cab0.jpg
618032d5bdc3031f12fea412bba6b437.jpg
2e27a579be8b1d5c855592f08dd2b923.jpg
0693698b84ccce8ada99f81d4eb5a97f.jpg



Sent from my iPhone using Tapatalk
 

toyotech

Active Member
Oct 30, 2018
37
13
8
40
Got a few Sequoia Roof Rack Kits left. Let me know if you like one. $550 plus shipping. You just have to order the crossbars separately. Link to order provided with each kit.
7e2aa3d03295486e8cefeef54ad5c495.jpg



Sent from my iPhone using Tapatalk