Recent content by dstgean

  1. dstgean

    Window channel part number?

    Patched it together with JB Weld shich of course didn't last. Might try Camry window clips once it warms up a bit.
  2. dstgean

    Window channel part number?

    Hey group, My passenger rear door window is no longer rolling up. I taped the window up in the meantime, but I'm having a difficult time figuring out the part number to order. My window is fine, the regulator is good as is the motor, but the metal channel had one of the posts rust off the...
  3. dstgean

    Armoring Up - What do we need?

    A.X.E. any updates?
  4. dstgean

    Sticky front piston

    Just did front pads since the rotors were in good shape. The cailper was a O'Reilly's remanufactured unit. No rears needed yet. Dan
  5. dstgean

    Factory speaker replacement????

    I bought mine with a cheap aftermarket Kenwood already installed. It works pretty well, but I have almost double the power to the driver's side and had to balance the heck out of it to sound decent--just down on power. I theink the factory head unit sends a signal to the amp that the Kenwood...
  6. dstgean

    Armoring Up - What do we need?

    +1 to all that has been mentioned, although a tube bumper with winch mount would be so cool to have as an option.
  7. dstgean

    Factory speaker replacement????

    I believe there are two separate amps that don't much like to play with aftermarket headunits.
  8. dstgean

    OME Front Suspension for our Sequoia

    Not pertinent to the 2886 info, but I am running 2885's with the 5100's on the second notch from the bottom. Smooth ride with no front bumper or winch yet, but I do get a bit of rub turning right on the inner fender liner. Wanted to go higher, but the tech that put it on said I'd get coil...
  9. dstgean

    Factory speaker replacement????

    Dealing with this myself at the moment. I bought an '03 with a bluetooth Kenwood headunit. Levels are not balanced left to right, so I'm a bit down on power. Once I balanced it out to compensate for the lower power output, it sounds pretty good with some aftermarket speakers fixing the blown...
  10. dstgean

    Finally got my 285 70 17's and lift

    Even if I can't get my images on here in a timely fashion, after a lift and tires, what would be your next purchase? Sliders? Front bumper/winch? Rear locker? This is a daily driver and travel rig. Hoping to be able to do some Colorado trails next July/August. Dan
  11. dstgean

    Finally got my 285 70 17's and lift

    Trying the images hosted on flicker... Hopefully that works... Dan
  12. dstgean

    Finally got my 285 70 17's and lift

    A hole punch in the inner fender liner and a couple zip ties seems to have eliminated my buzz while turning right. Dan
  13. dstgean

    Finally got my 285 70 17's and lift

    I'll try smaller photos while still hosted on Google Turns out the Firestone shop couldn't get the camber bolts to move.... Looks like a job to get out of there. I'll start with pb blaster, move to bfh, and finish, if necessary with a cutting wheel. Alternately, since the truck drives and...
  14. dstgean

    1stGenOffRoad.com '04 Sequoia Build Video Series

    You could probably get some 1.25" wheel spacers and a strut spacer for $100ish and add some 285 70 17's to you stock rims if you needed some new tires. I ended up spending less on Toyo Open Country ATII's than my wife's Yokohama's on her Expedition.
  15. dstgean

    Finally got my 285 70 17's and lift

    Strange. Works for me over several different tries.