Hey group,
My passenger rear door window is no longer rolling up. I taped the window up in the meantime, but I'm having a difficult time figuring out the part number to order. My window is fine, the regulator is good as is the motor, but the metal channel had one of the posts rust off the...
I bought mine with a cheap aftermarket Kenwood already installed. It works pretty well, but I have almost double the power to the driver's side and had to balance the heck out of it to sound decent--just down on power. I theink the factory head unit sends a signal to the amp that the Kenwood...
Not pertinent to the 2886 info, but I am running 2885's with the 5100's on the second notch from the bottom. Smooth ride with no front bumper or winch yet, but I do get a bit of rub turning right on the inner fender liner. Wanted to go higher, but the tech that put it on said I'd get coil...
Dealing with this myself at the moment. I bought an '03 with a bluetooth Kenwood headunit. Levels are not balanced left to right, so I'm a bit down on power. Once I balanced it out to compensate for the lower power output, it sounds pretty good with some aftermarket speakers fixing the blown...
Even if I can't get my images on here in a timely fashion, after a lift and tires, what would be your next purchase? Sliders? Front bumper/winch? Rear locker? This is a daily driver and travel rig. Hoping to be able to do some Colorado trails next July/August.
Dan
I'll try smaller photos while still hosted on Google
Turns out the Firestone shop couldn't get the camber bolts to move.... Looks like a job to get out of there. I'll start with pb blaster, move to bfh, and finish, if necessary with a cutting wheel. Alternately, since the truck drives and...
You could probably get some 1.25" wheel spacers and a strut spacer for $100ish and add some 285 70 17's to you stock rims if you needed some new tires. I ended up spending less on Toyo Open Country ATII's than my wife's Yokohama's on her Expedition.
Looks like my images didn't appear while hosted on google. I'll try another hosting site.
Thanks and I'm still interested in the best way to gain clearance at the rear of the front fender and shock ideas
Here's a side shot of the '03 sequoia with Bilsteins on the second notch and ARB 2885's in the front with ARB 2862's in the rear.
Close up of the ARB 2885 spring and Bilstein. The tech mentioned I'd have little uptravel since the spring would get bound up if I went to 3 or higher on the...
After ordering some parts, waiting for some other things to fall into line, I finally put some Toyo AT's on the '03 I bought. Put ARB2862's in the rear and Bilsteins in the front with ARB 2885's. Had some spring compressor problems with the fromt struts, so I took it over to 4wheel parts...
Just replaced it. Thanks. For some reason I thought it might be hard to bleed the brakes after puling the line. Nope. Easy as could be. Starting to gain a little confidence wrenching and having fun doing it. Now that I've done the brakes a few times on my rides in the last two months, I'm...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.